VAPOUR BLOCK
DuROCK Vapour Block is formulated with a co-polymer styrene-butadiene emulsion. It is a trowel applied high performance coating, applied onto non-combustible substrates as an air, vapour, and moisture barrier for PUCCS and InsulROCK Systems. The low water absorption combined with a high flexural strength makes Vapour Block an ideal water penetration barrier for use on exterior wall systems; in particular glass-fibre faced gypsum sheathing, cement board, concrete, or masonry substrates. As part of an air barrier system for a wall assembly, Vapour Block is compatible with most transition membranes comprised of bituminous SBS with fabric or cross-laminated polyethylene backing, as well as bituminous mastics and polyurethane foam sealants.
Additional Information: DATA SHEET – SDS (ENG)
POLAR BEAR
It is a trowel-applied high performance coating for use over wood substrates as both an air and moisture barrier.
Additional Documents: DATA SHEET – SDS (ENG)
Polar Bear is formulated with a 100% acrylic emulsion. Polar Bear contains fibers that enhance the cohesive and tensile strength for added durability. Polar Bear can also be used as an insulation adhesive. The low water absorption combined with a high flexural strength makes Polar Bear an ideal water penetration barrier for use on exterior wall systems; in particular plywood 12.7 mm (½ inch) thick and oriented strand board (OSB), minimum 11.1 mm (7/16 inch) thick.
ROLLER BEAR
Roller Bear is intended for use as the first coat in a two-coat moisture barrier system that serves as the second plane of protection behind PUCCS EIFS
Additional Documents: DATA SHEET – SDS (ENG)
Roller Bear is a factory-blended, ready-to-use, non- cementitious, polymeric coating that is supplied in 19 L (5 US gallon), 28 kg (62 lb) pails and is applied by spray, brush, or roller in a continuous layer to achieve a minimum dry thickness of 0.28 mm (11 mils) per coat.
CEMENT BEAR
It is a trowel-applied high performance coating for use on non-combustible substrates, as an air and moisture barrier for PUCCS and InsulROCK Systems.
Additional Documents: DATA SHEET – SDS (ENG)
DuROCK Cement Bear is formulated with a 100% acrylic emulsion that is field-mixed with Portland Cement. Cement Bear contains fibres that enhance the cohesive and tensile strength for added durability. Cement Bear can also be used as an insulation adhesive. The low water absorption combined with a high flexural strength makes Cement Bear an ideal water penetration barrier for use on exterior wall systems; in particular glass-fibre faced gypsum sheathing, cement board, concrete or masonry substrates. As part of an air barrier system for a wall assembly, Cement Bear is compatible with most transition membranes comprised of bituminous SBS with fabric or cross-laminated polyethylene backing, as well as bituminous mastics and polyurethane foam sealants.
ONE STEP READY MIX
DuROCK One Step Ready Mix is a formulated dry-mix cement parging, leveling coat and stucco base coat that is field-mixed with water.
Additional Documents: DATA SHEET – SDS (ENG)
It is a trowel-applied polymer modified cement plaster, a mixture of Portland cement, silica sand, and dry-resins. It is a versatile product that can be used as a leveling coat for conventional stucco, concrete and masonry substrates, and also as the scratch and brown coats for Stucco Plus. One Step Ready Mix has the benefit of high-early compressive and tensile strength, with excellent freeze-thaw stability and low water absorption. It is a convenient product since it requires only water to be added on site. One Step Ready Mix contains 1/4″ fibers that enhance the cohesive and adhesive strength for added durability. It is also a low-shrinkage polymer modified cement that makes it ideal for uneven leveling coats.
B.I.G EXTRA (BRUSH IT GREY)
B.I.G Extra is a dry mix cement parge specifically designed to enhance the appearance of cast-in-place concrete walls.
Additional Documents: DATA SHEET – SDS (ENG)
B.I.G Extra is polymer modified and requires only the addition of water. B.I.G Extra hides surface irregularities such as cold joints, colour variations, and form distortions. B.I.G Extra can also be used to disguise minor cracking and honeycombs. B.I.G Extra is available in 44 lb (20 kg) bags.
ONE STEP CONCENTRATE
DuROCK One Step Concentrate is a formulated dry-mix concentrate for use in cement parging, leveling coats and stucco base coats.
Additional Documents: DATA SHEET – SDS (ENG)
It is field-mixed with Portland cement, silica sand and water. One Step Concentrate is a trowel or spray-applied polymer modified cement plaster, a mixture of minerals, fine aggregates, and dry-resins. It is a versatile product that can be used as a leveling coat for conventional stucco, concrete and masonry substrates, and also as the scratch and brown coats for Stucco Plus. One Step Concentrate has the benefit of high-early compressive and tensile strength, with excellent freeze-thaw stability and low water absorption. One Step Concentrate contains 1/4″ fibers that enhance the cohesive and adhesive strength for added durability. It is also a low-shrinkage polymer modified cement that makes it ideal for uneven leveling coats.
B2000
B2000 is an acrylic-modified cementitious dry mix base coat designed for use over Expanded Polystyrene (EPS) Insulated Concrete Forms (ICF).
Additional Documents: DATA SHEET – SDS (ENG)
B2000 forms a strong yet flexible, crack resistant base coat that is intended for use on the exterior, above-grade portion of ICF foundation walls. B2000 has high flexural and bond strength, is water vapour permeable, and has excellent freeze/thaw stability with low water absorption and low shrinkage.
PREP COAT
Prep Coat is 100% acrylic emulsion that is field-mixed with Portland Cement.
Additional Documents: DATA SHEET – SDS (ENG)
It is a trowel-applied high performance coating for use on PUCCS and InsulROCK Systems as a non-combustible base coat and adhesive. Prep Coat is a flexible and durable base coat that can also be used as a leveling coat for stucco, concrete and masonry substrates. It has excellent freeze-thaw stability, low water absorption, breathable to water vapour and non-combustible. It is a convenient product since it requires only water to be added on site.
PREP COAT PLUS
Prep Coat Plus is 100% styrene acrylic emulsion that is field-mixed with Portland Cement.
Additional Documents: DATA SHEET – SDS (ENG)
It is a trowel-applied high performance coating for use on PUCCS RMC and InsulROCK RMC Systems as a base coat and adhesive with enhanced flexibility and strength. Prep Coat Plus is a flexible and durable base coat that can also be used as a leveling coat for stucco, concrete and masonry substrates. It has excellent freeze-thaw stability, low water absorption, and breathable to water vapour. Prep Coat Plus can be applied as a high-build leveling coat, for added impact resistance on EIFS or to make a wall plumb and flat, applied up to 6.4 mm (1/4 inch) thick in a single pass if required.
PREP COAT D
Prep Coat is dry polymer based dry-mix material that is field-mixed with water.
Additional Documents: DATA SHEET – SDS (ENG)
It is a trowel-applied high performance coating for use on PUCCS and InsulROCK Systems as a non-combustible base coat and adhesive. Prep Coat D is a flexible and durable base coat that can also be used as a leveling coat for stucco, concrete and masonry substrates. It has excellent freeze-thaw stability, low water absorption, breathable to water vapour and non-combustible. It is a convenient product since it requires only water to be added on site.
PREP COAT Q
Prep Coat Q is a fast drying, dry polymer based dry-mix material that is field-mixed with water.
Additional Documents: DATA SHEET – SDS (ENG)
It is ideal for use in cold temperature, high humidity conditions. It is a trowel-applied high performance coating for use on PUCCS and InsulROCK Systems as a non-combustible base coat and adhesive. Prep Coat Q is a flexible and durable base coat that can also be used as a leveling coat for stucco, concrete and masonry substrates. It has excellent freeze-thaw stability, low water absorption, breathable to water vapour and non-combustible. It is a convenient product since it requires only water to be added on site.
PERFECT PARGE
Perfect Parge is a polymer based dry-mix material that.
Additional Documents: DATA SHEET – SDS (ENG)
It is a trowel-applied adhesive for use in the attachment of decorative moldings and EPS trim on PUCCS and InsulROCK Systems. Perfect Parge is a flexible and durable base coat that can also be used as a leveling coat for stucco, concrete and masonry substrates. It has excellent freeze-thaw stability, low water absorption, breathable to water vapour and non-combustible. It is a convenient product since it requires only water to be added on site.
PREP COAT NCP
Prep Coat NCP or Non-cementitious Prep Coat, is formulated with a 100% styrene acrylic emulsion.
Additional Documents: DATA SHEET – SDS (ENG)It is a trowel applied high performance coating for use as an optional base coat on the PUCCS RMC and InsulROCK RMC Systems, as well as the Exterior Finish Systems. NCP is a factory-mixed base coat that does not require the addition of water or Portland cement.
FIBREGLASS MESH
Mesh for DuROCK Exterior Insulation Finish Systems is made of alkali-resistant fibreglass.
Additional Documents: DATA SHEET – MSDS
All mesh is made by a DuROCK-approved manufacturer, with DuROCK’s logo plainly visible on the 5 ounce and high-impact reinforcing mesh products.
EPS BOARD
Expanded Polystyrene (EPS) insulation board for Exterior Insulation Finish Systems.
Additional Documents: DATA SHEET – SDS
Expanded Polystyrene (EPS) is made of 100% virgin polystyrene resin, aged and cut in accordance with the requirements of ASTM E2430, and compliant with ULC-S701. Please refer to EIF System specifications for applicable thicknesses & sheet size.
PUCC-ROCK
PUCC-ROCK insulation is non-combustible mineral fibre/wool manufactured by Rockwool, compliant with CAN/ULC-S702.1 and CAN/ULC-S 114.
Additional Documents: DATA SHEET – SDS
Thermal resistance value is RSI 0.70 per 25 mm (R 4.0 per inch). PUCC-ROCK insulation incorporates a geometrically defined drainage cavity (GDDC) on the backside that is 10 mm deep and 37% open. PUCC-ROCK insulation includes an integral alkali-resistant fibreglass mesh on the front side. PUCC-ROCK insulation is available in 51, 76, 102, 127, and 152 mm (2, 3, 4, 5, and 6 inch) thicknesses.
UNI-TRACK
Uni-Track is a PolyVinyl Chloride (PVC) extrusion designed to be used at horizontal terminations and at horizontal joints where Exterior Insulation Finish Systems are expected to drain.
Its one-size-fits-all profile eliminates the need to stock different profiles for every insulation thickness. Uni-Track is three inches (76 mm) high, one inch (25 mm) wide, and ten feet (3.05 m) long. It is white in colour, but can be painted with most exterior latex paints.
UNI-FLASH
Uni-Flash self-flashing drainage track is a PVC extrusion designed to be used at window heads and other similar locations where Exterior Insulation Finish Systems are expected to drain.
It’s one-size-fits-all profile eliminates the need to stock different profiles for every insulation thickness. Uni-Flash is two inches wide (50 mm), three inches high (75 mm), and ten feet (3 m) long. It is white in colour, but it can be painted with most exterior latex paints.
PROTECTO WRAP PRIMER FREE EIFS TAPE
Primer Free Stucco/EIFS Tape is a high performance tape designed for use with Stucco and EIFS systems to seal around penetrations and at sheathing joints and window / door flanges.
Primer Free Stucco/EIFS Tape can be applied to most substrates without the use of primer or mechanical fasteners. The polyester fabric top layer provides an excellent bonding surface for cementitious and synthetic stucco coatings.
TROWEL FINISHES
Trowel Finishes are premixed, water-based, 100% acrylic coatings available in several textures and unlimited colours.
Trowel Finishes are flexible, breathable, water-repelling, dirt pick-up resistant (DPR), ultra-violet resistant finishes consisting of granulated quartz or marble, pigment, resin and other additives specially formulated for both exterior and interior use. Trowel Finishes are ideally suited for both new and/or retrofit construction. Trowel Finishes are available in several textures distinguished by their aggregate size and application technique. Coarse Coat, Desert Sand, Grain, Marble Coat, Max Coat, Pebble Rock, Sand Coat, Spacco, and Venetian finishes are trowel-applied coatings designed for use over wall and ceiling areas. Fine Coat and Pebble Coat finishes are trowel-applied coatings designed for use over details such as cornice, quoins, columns, etc.
SPRAY FINISHES
Spray Finishes are premixed, water-based, 100% acrylic coatings available in several textures and unlimited colours.
Spray Finishes are flexible, breathable, water-repelling, dirt pick-up resistant (DPR), ultraviolet resistant finishes consisting of silica sand, pigment, resin and other additives formulated for both exterior and interior use. Spray Finishes are ideally suited for both new and/or retrofit construction. Whereas Pebble Spray and Fine Spray are intended for details only, the remaining Spray Finishes are designed for use over wall and ceiling areas.
PLUS FINISHES
Plus Finishes are formulated with 100% acrylic emulsions designed especially for use in elastomeric wall coatings, providing outstanding exterior durability, as well as excellent elasticity and elongation properties that are required to bridge continually over cracks without wrinkling.
Due to the low glass-transition temperature, these finishes are able to maintain flexibility across a broad range of temperatures. Plus Finishes can be color-tinted, and are intended for application on vertical wall surfaces. These finishes are most effective when applied over rigid substrates (such as cement plasters and concrete), and can also be used with EIFS and Exterior Finishing Systems. Plus Finishes are formulated to have excellent dirt-pick-up resistance, and superior water resistance as well as resistance to chalking. The dirt pick-up resistant chemistry of Plus Finishes enables the coating to maintain its attractive appearance, while providing superior resistance to the effects of acid rain, pollution and ultra-violet light. Water beads on the surface thereby washing away the dirt. Plus Finishes are permeable to water vapour, which permits open vapour diffusion through wall assemblies.
ROLLER FINISHES
Roller Finishes are premixed, water-based, 100% acrylic coatings available in several textures and unlimited colors.
Additional Documents: DATA SHEET
Roller Finishes are flexible, breathable, water-repelling, dirt pick-up resistant (DPR), ultraviolet resistant finishes consisting of fine fillers, pigment, resin and other additives formulated for both exterior and interior use. Roller Finishes are ideally suited for both new and/or retrofit construction. Roll On (small aggregate), Roll On Coarse (large aggregate) and Airless (no aggregate) are intended for use on decorative moldings and a variety of wall surfaces.
SPECIAL FINISHES
ANGELSTONE/GLITTEROCK
Angel Stone is ideal for use in interior or exterior applications, in new construction or renovations, and in commercial, industrial, institutional and residential projects.
Additional Documents: DATA SHEET – SDS
Angel Stone is a decorative textured protective coating engineered for use over any system. Angel Stone is a 100% acrylic finish containing bronze mica flakes and pearlescent pigments giving the finish a shimmering effect. Angel Stone is a trowel-applied finish texture available in hundreds of colors.
TRICOL
Tricol finish is a premixed, water-based, acrylic, quartz stone finish available in many color combinations.
Additional Documents: DATA SHEET – MSDS
Tricol can be both trowel and spray-applied, used for wall and ceiling areas, as well as for details such as cornice, quoins, columns, etc.
GEMSTONE
Gemstone finish is a premixed, water-based, acrylic, quartz stone finish available in many color combinations.
Additional Documents: DATA SHEET – BROCHURE – SDS
Gemstone can be both trowel and spray-applied, used for wall and ceiling areas, as well as for details such as cornice, quoins, columns, etc.
UNIGUM
Unigum is designed for use where an elastic, waterproof, dirt-resistant coating is required.
Additional Documents: DATA SHEET – SDS
Unigum is a premixed, water-based, elastomeric acrylic coating available in unlimited colors. Unigum actually bridges cracks – spanning the crack as it expands – and returning to its original form when the crack contracts. Unigum’s ability to resist ultraviolet degradation and its low-temperature flexibility ensures it will retain its color and overall appearance for years to come.
SPACCO
Spacco is a decorative protective coating designed for use as a textured free hand faux finish.
Additional Documents: DATA SHEET – SDS
Spacco is ideal for use in both interior and exterior applications, in new construction or renovations, and in commercial, industrial, institutional and residential projects. Spacco is a 100% acrylic, flexible, breathable coating. Spacco is a trowel-applied finish texture and upon request, can be custom colored to match any customer-specified color.
CRYSTAL COAT
Crystal Coat is a gypsum-based decorative textured protective coating designed for use as a textured, free hand faux finish base coat.
Additional Documents: DATA SHEET – SDS
It has been designed to replace conventional gypsum based architectural wall finishes. Crystal Coat is ideal for use in interior applications, in new construction or renovations, and in commercial, industrial, institutional and residential projects. Crystal Coat is a 100% acrylic, flexible, breathable coating.
POOL QUARTZ
Pool Quartz is a complete pool plaster mix that is a combination of white Portland cement, crushed marble, mineral fillers, additives and 3M Color Quartz.
Additional Documents:– DATA SHEET – SDS
Pool Quartz cures to a smooth, hard surface. Pool Quartz has excellent abrasion resistance and with the addition of 3M Color Quartz it performs upwards of three times better against both mechanical and chemical wear compared to conventional plaster.
HARLOW
Harlow Finishes are premixed, water-based, 100% acrylic coatings available in a variety of colors.
Additional Documents: FEATURE SHEET – COLOUR CHART
Harlow finishes are flexible, breathable, water-repelling, dirt pick-up resistant (DPR), ultra-violet resistant finishes consisting of granulated quartz or marble, metallic pigments, resin and other additives specially formulated for both exterior and interior use. Harlow Finishes are ideally suited for both new and/or retrofit construction. Harlow Finishes provide a high yield per single coat making them the most cost effective metallic finishes in the industry.
GoBrick
GoBrick is a new innovative acrylic finish for exterior insulation and finish systems.
Additional Documents: FEATURE SHEET – DATA SHEET – SPEC
A simply spectacular look – GoBrick provides an uncanny resemblance to real brick with many added benefits.