DuROCK Stucco
DuROCK Barrier Coats – DuROCK Leveiling Coats – DuROCK Base Coats & Adhesives – DuROCK Components – DuROCK Finishes – DuROCK Specialty
Barrier Coats
VAPOR BLOCK
DuROCK Vapour Block is formulated with a co-polymer styrene-butadiene emulsion. It is a trowel-applied high-performance coating, applied onto non-combustible substrates as an air, vapor, and moisture barrier for DuROCK PUCCS and InsulROCK Systems. The low water absorption combined with high flexural strength makes Vapour Block an ideal water penetration barrier for use on exterior wall systems; in particular, glass-fiber faced gypsum sheathing, cement board, concrete, or masonry substrates. Check with DuROCK for use on other substrates. As part of an air barrier system for a wall assembly, Vapour Block is compatible with most transition membranes comprised of bituminous SBS with fabric or cross-laminated polyethylene backing, as well as bituminous mastics and polyurethane foam sealants. Refer to DuROCK system specifications for product-specific guidelines.
DOWNLOAD DOCUMENTS – DATA SHEET – SDS (ENG. & FR.)
ROLLER BEAR
Roller Bear is intended for use as the first coat in a two-coat moisture barrier system that serves as the second plane of protection behind DuROCK PUCCS EIFS. Roller Bear is a factory-blended, ready-to-use, non- cementitious, polymeric coating that is supplied in 19 L (5 US gallon), 28 kg (62 lb) pails and is applied by spray, brush, or roller in a continuous layer to achieve a minimum dry thickness of 0.28 mm (11 mils) per coat.
DOWNLOAD DOCUMENTS – DATA SHEET – SDS (ENG. & FR.)
POLAR BEAR
DuROCK Polar Bear is formulated with a 100% acrylic emulsion. It is a trowel-applied high-performance coating for use over wood substrates as both an air and moisture barrier, in particular for the DuROCK PUCCS RMC-1 and InsulROCK RMC-1 Systems. Polar Bear contains fibers that enhance the cohesive and tensile strength for added durability. Polar Bear can also be used as an insulation adhesive. The low water absorption combined with high flexural strength makes Polar Bear an ideal water penetration barrier for use on exterior wall systems; in particular plywood 12.7 mm (½ inch) thick and oriented strand board (OSB), minimum 11.1 mm (7/16 inch) thick. Check with DuROCK for use on other substrates. As part of an air barrier system for a wall assembly, Polar Bear is compatible with most transition membranes comprised of bituminous SBS with fabric or cross-laminated polyethylene backing, as well as bituminous mastics and polyurethane foam sealants. Refer to DuROCK system specifications for product-specific guidelines.
DOWNLOAD DOCUMENTS – DATA SHEET – SDS (ENG. & FR.)
CEMENT BEAR
DuROCK Cement Bear is formulated with a 100% acrylic emulsion that is field-mixed with Portland Cement. It is a trowel-applied high-performance coating for use on non-combustible substrates, as an air and moisture barrier for DuROCK PUCCS and InsulROCK Systems. Cement Bear contains fibers that enhance the cohesive and tensile strength for added durability. Cement Bear can also be used as an insulation adhesive. The low water absorption combined with high flexural strength makes Cement Bear an ideal water penetration barrier for use on exterior wall systems; in particular, glass-fiber faced gypsum sheathing, cement board, concrete or masonry substrates. Check with DuROCK for use on other substrates. As part of an air barrier system for a wall assembly, Cement Bear is compatible with most transition membranes comprised of bituminous SBS with fabric or cross-laminated polyethylene backing, as well as bituminous mastics and polyurethane foam sealants. Refer to DuROCK system specifications for product-specific guidelines.
DuROCK Leveling Coats
ONE STEP READY MIX
DuROCK One Step Ready Mix is a formulated dry-mix cement parging, leveling coat and stucco base coat that is field-mixed with water. It is a trowel-applied polymer modified cement plaster, a mixture of Portland cement, silica sand, and dry-resins. It is a versatile product that can be used as a leveling coat for conventional stucco, concrete and masonry substrates, and also as the scratch and brown coats for DuROCK Stucco Plus. One Step Ready Mix has the benefit of high-early compressive and tensile strength, with excellent freeze-thaw stability and low water absorption. It is a convenient product since it requires only water to be added on site. One Step Ready Mix contains 1/4″ fibers that enhance the cohesive and adhesive strength for added durability. It is also a low-shrinkage polymer-modified cement that makes it ideal for uneven leveling coats.
DOWNLOAD DOCUMENTS – DATA SHEET – SDS (ENG. & FR.)
BIG EXTRA (BRUSH IT GREY)
B.I.G Extra is a dry mix cement parge specifically designed to enhance the appearance of cast-in-place concrete walls. B.I.G Extra is polymer modified and requires only the addition of water. B.I.G Extra hides surface irregularities such as cold joints, color variations, and form distortions. B.I.G Extra can also be used to disguise minor cracking and honeycombs. B.I.G Extra is available in 44 lb (20 kg) bags.
DOWNLOAD DOCUMENTS – DATA SHEET – SDS (ENG. & FR.)
ONE STEP CONCENTRATE (EXPORT ONLY)
DuROCK One Step Concentrate is a formulated dry-mix concentrate for use in cement parging, leveling coats and stucco base coats. It is field-mixed with Portland cement, silica sand, and water. One Step Concentrate is a trowel or spray-applied polymer modified cement plaster, a mixture of minerals, fine aggregates, and dry-resins. It is a versatile product that can be used as a leveling coat for conventional stucco, concrete and masonry substrates, and also as the scratch and brown coats for DuROCK Stucco Plus. One Step Concentrate has the benefit of high-early compressive and tensile strength, with excellent freeze-thaw stability and low water absorption. One Step Concentrate contains 1/4″ fibers that enhance the cohesive and adhesive strength for added durability. It is also a low-shrinkage polymer-modified cement that makes it ideal for uneven leveling coats.
DOWNLOAD DOCUMENTS – DATA SHEET – SDS (ENG. & FR.)
DuROCK Base Coats & Adhesives
B2000
DuRock B2000 is an acrylic-modified cementitious dry mix base coat designed for use over Expanded Polystyrene (EPS) Insulated Concrete Forms (ICF). B2000 forms a strong yet flexible, crack-resistant base coat that is intended for use on the exterior, above-grade portion of ICF foundation walls. B2000 has high flexural and bond strength, is water vapor permeable, and has excellent freeze/thaw stability with low water absorption and low shrinkage.
DOWNLOAD DOCUMENTS – DATA SHEET – SDS (ENG. & FR.)
PREP COAT
DuROCK Prep Coat is 100% acrylic emulsion that is field-mixed with Portland Cement. It is a trowel-applied high-performance coating for use on DuROCK PUCCS and InsulROCK Systems as a non-combustible base coat and adhesive. Prep Coat is a flexible and durable base coat that can also be used as a leveling coat for stucco, concrete and masonry substrates. It has excellent freeze-thaw stability, low water absorption, breathable to water vapor and non-combustible. It is a convenient product since it requires only water to be added on site.
DOWNLOAD DOCUMENTS – DATA SHEET – SDS (ENG. & FR.)
PREP COAT PLUS
DuROCK Prep Coat Plus is 100% styrene acrylic emulsion that is field-mixed with Portland Cement. It is a trowel-applied high-performance coating for use on DuROCK PUCCS RMC and InsulROCK RMC Systems as a base coat and adhesive with enhanced flexibility and strength. Prep Coat Plus is a flexible and durable base coat that can also be used as a leveling coat for stucco, concrete and masonry substrates. It has excellent freeze-thaw stability, low water absorption, and breathable to water vapor. Prep Coat Plus can be applied as a high-build leveling coat, for added impact resistance on EIFS or to make a wall plumb and flat, applied up to 6.4 mm (1/4 inch) thick in a single pass if required.
DOWNLOAD DOCUMENTS – DATA SHEET – SDS (ENG. & FR.)
PREP COAT D
DuROCK Prep Coat is dry polymer-based dry-mix material that is field-mixed with water. It is a trowel-applied high-performance coating for use on DuROCK PUCCS and InsulROCK Systems as a non-combustible base coat and adhesive. Prep Coat D is a flexible and durable base coat that can also be used as a leveling coat for stucco, concrete and masonry substrates. It has excellent freeze-thaw stability, low water absorption, breathable to water vapor and non-combustible. It is a convenient product since it requires only water to be added on site.
DOWNLOAD DOCUMENTS – DATA SHEET – SDS (ENG. & FR.)
PREP COAT Q
DuROCK Prep Coat Q is a fast-drying, dry polymer-based dry-mix material that is field-mixed with water. It is ideal for use in cold temperature, high humidity conditions. It is a trowel-applied high-performance coating for use on DuROCK PUCCS and InsulROCK Systems as a non-combustible base coat and adhesive. Prep Coat Q is a flexible and durable base coat that can also be used as a leveling coat for stucco, concrete and masonry substrates. It has excellent freeze-thaw stability, low water absorption, breathable to water vapor and non-combustible. It is a convenient product since it requires only water to be added on site.
DOWNLOAD DOCUMENTS – DATA SHEET – SDS (ENG. & FR.)
PERFECT PARGE
DuROCK Perfect Parge is a polymer-based dry-mix material that. It is a trowel-applied adhesive for use in the attachment of decorative moldings and EPS trim on DuROCK PUCCS and InsulROCK Systems. Perfect Parge is a flexible and durable base coat that can also be used as a leveling coat for stucco, concrete and masonry substrates. It has excellent freeze-thaw stability, low water absorption, breathable to water vapor and non-combustible. It is a convenient product since it requires only water to be added on site.
DOWNLOAD DOCUMENTS – DATA SHEET – SDS (ENG. & FR.)
PREP COAT NCP
DuROCK NCP, Non-cementitious Prep Coat, is formulated with a 100% styrene acrylic emulsion. It is a trowel-applied high-performance coating for use as an optional base coat on the DuROCK PUCCS RMC and InsulROCK RMC Systems, as well as the DuROCK Exterior Finish Systems. NCP is a factory-mixed base coat that does not require the addition of water or Portland cement.
DOWNLOAD DOCUMENTS – DATA SHEET – SDS (ENG. & FR.)
DuROCK Components
FIBREGLASS MESH
Mesh for DuROCK Exterior Insulation Finish Systems is made of alkali-resistant fiberglass. All mesh is made by a DuROCK-approved manufacturer, with DuROCK’s logo plainly visible on the 5 ounce and high-impact reinforcing mesh products.
DOWNLOAD DOCUMENTS – DATA SHEET – MSDS
EPS BOARD
Expanded Polystyrene (EPS) insulation board for DuROCK Exterior Insulation Finish Systems is made of 100% virgin polystyrene resin, aged and cut in accordance with the requirements of ASTM E2430, and compliant with ULC-S701. EPS insulation board is made by a DuROCK-approved manufacturer and is packaged in bags with DuROCK’s logo plainly visible. Please refer to EIF System specifications for applicable thicknesses & sheet size.
DOWNLOAD DOCUMENTS – DATA SHEET – SDS
PUCC-ROCK
DuROCK PUCC-ROCK insulation is non-combustible mineral fibre/wool manufactured by Rockwool, compliant with CAN/ULC-S702.1 and CAN/ULC-S 114. The thermal resistance value is RSI 0.70 per 25 mm (R 4.0 per inch). PUCC-ROCK insulation incorporates a geometrically defined drainage cavity (GDDC) on the backside that is 10 mm deep and 37% open. PUCC-ROCK insulation includes an integral alkali-resistant fiberglass mesh on the front side. PUCC-ROCK insulation is available in 51, 76, 102, 127, and 152 mm (2, 3, 4, 5, and 6 inches) thicknesses.
DOWNLOAD DOCUMENTS – DATA SHEET – SDS
UNI-TRACK
DuROCK’s patented Uni-Track is a Polyvinyl Chloride (PVC) extrusion designed to be used at horizontal terminations and at horizontal joints where DuROCK Exterior Insulation Finish Systems are expected to drain. Its one-size-fits-all profile eliminates the need to stock different profiles for every insulation thickness. DuROCK Uni-Track is three inches (76 mm) high, one inch (25 mm) wide, and ten feet (3.05 m) long. It is white in color but can be painted with most exterior latex paints.
DOWNLOAD DOCUMENTS – DATA SHEET – MSDS
UNI-FLASH
DuROCK’s patented Drainage Flash is a Polyvinyl Chloride (PVC) extrusion designed to be used at window head locations where DuROCK Exterior Insulation Finish Systems are expected to drain. Its one-size-fits-all profile eliminates the need to stock different profiles for every insulation thickness. DuROCK Drainage Flash is ten feet (3.05 m) long and is available in 1 3/4 inch (46 mm) and 2 inches ( 52 mm) widths. It is white in color but can be painted with most exterior latex paints.
DOWNLOAD DOCUMENTS – DATA SHEET
SOPRAGRIP – EIFS TAPE
SOPRAGRIP F is a self-adhesive membrane composed of SBS modi!ed bitumen and a non-woven polyester exposed reinforcement. The self-adhesive site is protected by a silicone release !lm. The non-woven polyester top surface provides good adhesion properties for liquid applied air/vapour barrier and exterior !finishing coating. SOPRAGRIP F is used as a cover strip over COLPHENE ICF membranes top termination. It is also used as reinforcement over gypsum or concrete board joints before installation of a liquid air/vapour barrier membrane.
DOWNLOAD DOCUMENTS – DATA SHEET – MSDS
DuROCK Finishes
TROWEL FINISHES
DuROCK Trowel Finishes are premixed, water-based, 100% acrylic coatings available in several textures and unlimited colors. DuROCK Trowel Finishes are flexible, breathable, water-repelling, dirt pick-up resistant (DPR), ultra-violet resistant finishes consisting of granulated quartz or marble, pigment, resin and other additives specially formulated for both exterior and interior use. DuROCK Trowel Finishes are ideally suited for both new and/or retrofit construction. DuROCK Trowel Finishes are available in several textures distinguished by their aggregate size and application technique. Coarse Coat, Desert Sand, Grain, Marble Coat, Max Coat, Pebble Rock, Sand Coat, Spacco, and Venetian finishes are trowel-applied coatings designed for use over wall and ceiling areas. Fine Coat and Pebble Coat finishes are trowel-applied coatings designed for use over details such as cornice, quoins, columns, etc.
DOWNLOAD DOCUMENTS (ENGLISH) – DATA SHEET – VENETIAN SDS – COARSE COAT SDS – FINE COAT SDS – FINE STONE SDS – FINO SDS – MARBLE COAT COARSE SDS – MARBLE COAT FINE SDS – MARBLE COAT SDS – MAX COAT SDS – PEBBLE COAT SDS – PEBBLE FINE SDS – PEBBLE ROCK FINE SDS – PEBBLE ROCK SDS
DOWNLOAD DOCUMENTS (FRENCH) – VENETIAN SDS – COARSE COAT SDS – FINE COAT SDS – FINE STONE SDS – FINO SDS – MARBLE COAT COARSE SDS – MARBLE COAT FINE SDS – MARBLE COAT SDS – MAX COAT SDS – PEBBLE COAT SDS – PEBBLE ROCK FINE SDS – PEBBLE ROCK SDS
SPRAY FINISHES
DuROCK Spray Finishes are premixed, water-based, 100% acrylic coatings available in several textures and unlimited colors. DuROCK Spray Finishes are flexible, breathable, water-repelling, dirt pick-up resistant (DPR), ultraviolet resistant finishes consisting of silica sand, pigment, resin and other additives formulated for both exterior and interior use. DuROCK Spray Finishes are ideally suited for both new and/or retrofit construction. Whereas Pebble Spray and Fine Spray are intended for details only, the remaining DuROCK Spray Finishes are designed for use over wall and ceiling areas.
DOWNLOAD DOCUMENTS (ENGLISH) – DATA SHEET – SPRAY SDS – AIRLESS SDS – PEBBLE SPRAY SDS – ROLL ON SDS – ROLL ON COARSE SDS
DOWNLOAD DOCUMENTS (FRENCH) – SPRAY SDS – AIRLESS SDS – PEBBLE SPRAY SDS – ROLL ON SDS – ROLL ON COARSE SDS
PLUS FINISHES
DuROCK Plus Finishes are formulated with 100% acrylic emulsions designed especially for use in elastomeric wall coatings, providing outstanding exterior durability, as well as excellent elasticity and elongation properties that are required to bridge continually over cracks without wrinkling. Due to the low glass-transition temperature, these finishes are able to maintain flexibility across a broad range of temperatures.DuROCK Plus Finishes can be color-tinted and are intended for application on vertical wall surfaces. These finishes are most effective when applied over rigid substrates (such as cement plasters and concrete), and can also be used with DuROCK EIFS and Exterior Finishing Systems. DuROCK Plus Finishes are formulated to have excellent dirt-pick-up resistance, and superior water-resistance as well as resistance to chalking. The dirt pick-up resistant chemistry of DuROCK Plus Finishes enables the coating to maintain its attractive appearance while providing superior resistance to the effects of acid rain, pollution, and ultra-violet light. Water beads on the surface thereby washing away the dirt. DuROCK Plus Finishes are permeable to water vapour, which permits open vapour diffusion through wall assemblies.
DOWNLOAD DOCUMENTS (ENGLISH) – DATA SHEET – AIRLESS PLUS SDS – MARBLE COAT COARSE PLUS SDS – MARBLE COAT FINE PLUS SDS –MARBLE CLOAT PLUS SDS – MAX COAT PLUS SDS – PEBBLE COAT PLUS SDS – PEBBLE ROCK FINE PLUS SDS – PEBBLE ROCK PLUS SDS – ROLL ON PLUS SDS – SAND COAT PLUS SDS – SPACCO PLUS SDS – SPRAY PLUS SDS – VENETIAN PLUS SDS
DOWNLOAD DOCUMENTS (FRENCH) – AIRLESS PLUS SDS – MARBLE COAT COARSE PLUS SDS – MARBLE COAT FINE PLUS SDS –MARBLE CLOAT PLUS SDS – MAX COAT PLUS SDS – PEBBLE COAT PLUS SDS – PEBBLE ROCK FINE PLUS SDS – PEBBLE ROCK PLUS SDS – ROLL ON PLUS SDS – SAND COAT PLUS SDS – SPACCO PLUS SDS – SPRAY PLUS SDS – VENETIAN PLUS SDS
ROLLER FINISHES
DuROCK Roller Finishes are premixed, water-based, 100% acrylic coatings available in several textures and unlimited colors. DuROCK Roller Finishes are flexible, breathable, water-repelling, dirt pick-up resistant (DPR), ultraviolet resistant finishes consisting of fine fillers, pigment, resin and other additives formulated for both exterior and interior use. DuROCK Roller Finishes are ideally suited for both new and/or retrofit construction. Roll-On (small aggregate), Roll-On Coarse (large aggregate) and Airless (no aggregate) are intended for use on decorative moldings and a variety of wall surfaces.
DOWNLOAD DOCUMENTS (ENGLISH) – DATA SHEET – ROLL ON SDS – ROLL ON COARSE SDS – AIRLESS SDS – BASE COAT PRIMER SDS
DOWNLOAD DOCUMENTS (FRENCH) – DATA SHEET – ROLL ON SDS – ROLL ON COARSE SDS – AIRLESS SDS – BASE COAT PRIMER SDS
ROLL-ON
____________________________________________
ROLL-ON COARSE
____________________________________________
FINECOAT
____________________________________________
SPRAY
____________________________________________
PEBBLE SPRAY
____________________________________________
PEBBLE ROCK
____________________________________________
CRYSTAL COAT
____________________________________________
SPACCO
____________________________________________
COARSE COAT
____________________________________________
SAND COAT
____________________________________________
MARBLE COAT
____________________________________________
MARBLE FINE
____________________________________________
VENETIAN
____________________________________________
MAX COAT
____________________________________________
PEBBLE COAT
____________________________________________
GEMSTONE FINE
____________________________________________
GEMSTONE
____________________________________________
GLITTEROCK
____________________________________________
MOONSTONE
____________________________________________
SHIMMER STONE
DuROCK Specialty
ANGELSTONE/GLITTEROCK
DuROCK Angel Stone is ideal for use in interior or exterior applications, in new construction or renovations, and in commercial, industrial, institutional and residential projects. DuROCK Angel Stone is a decorative textured protective coating engineered for use over any DuROCK system. DuROCK Angel Stone is a 100% acrylic finish containing bronze mica flakes and pearlescent pigments giving the finish a shimmering effect. DuROCK Angel Stone is a trowel-applied finish texture available in hundreds of colors.
DOWNLOAD DOCUMENTS (English) – DATA SHEET – SDS
DOWNLOAD DOCUMENTS (French) – SDS
TRICOL
DuROCK Tricol finish is a premixed, water-based, acrylic, quartz stone finish available in many colour combinations. DuROCK Tricol can be both trowel and spray-applied, used for wall and ceiling areas, as well as for details such as cornice, quoins, columns, etc.
DOWNLOAD DOCUMENTS – DATA SHEET – MSDS
GEMSTONE
DuROCK Gemstone finish is a premixed, water-based, acrylic, quartz stone finish available in many colour combinations. DuROCK Gemstone can be both trowel and spray-applied, used for wall and ceiling areas, as well as for details such as cornice, quoins, columns, etc.
DOWNLOAD DOCUMENTS (English) – DATA SHEET – SDS
DOWNLOAD DOCUMENTS (French) – SDS
UNIGUM
Unique is designed for use where an elastic, waterproof, dirt-resistant coating is required. Unique is a premixed, water-based, elastomeric acrylic coating available in unlimited colors. Unique actually bridges cracks – spanning the crack as it expands – and returning to its original form when the crack contracts. Unigum’s ability to resist ultraviolet degradation and its low-temperature flexibility ensures it will retain its color and overall appearance for years to come.
DOWNLOAD DOCUMENTS (English) – DATA SHEET – SDS
DOWNLOAD DOCUMENTS (French) – SDS
SPACCO
DuROCK Spacco is a decorative protective coating designed for use as a textured freehand faux finish. DuROCK Spacco is ideal for use in both interior and exterior applications, in new construction or renovations, and in commercial, industrial, institutional and residential projects. DuROCK Spacco is a 100% acrylic, flexible, breathable coating. DuROCK Spacco is a trowel-applied finish texture and upon request, can be custom colored to match any customer-specified color.
DOWNLOAD DOCUMENTS (English) – DATA SHEET – SDS
DOWNLOAD DOCUMENTS (French) – SDS
CRYSTAL COAT
DuROCK Crystal Coat is a gypsum-based decorative textured protective coating designed for use as a textured, freehand faux finish base coat. It has been designed to replace conventional gypsum-based architectural wall finishes. DuROCK Crystal Coat is ideal for use in interior applications, in new construction or renovations, and in commercial, industrial, institutional and residential projects. DuROCK Crystal Coat is a 100% acrylic, flexible, breathable coating.
DOWNLOAD DOCUMENTS (English) – DATA SHEET SDS
DOWNLOAD DOCUMENTS (French) – SDS
